WhichBot / Construction & building robots / FieldPrinter
Dusty Robotics · AVAILABLE

Dusty Robotics FieldPrinter: price, specs & review

The layout robot. Prints the full digital floor plan - walls, doors, MEP - directly onto the slab at millimetre accuracy, killing the most expensive error source in construction.

The bottom line

Best for: General contractors and framers on commercial interiors who want near-zero layout error across complex floor plans.

Price: The Dusty Robotics FieldPrinter is not sold at a retail price. Dusty offers subscription pricing; industry estimates put it around $3,000–$5,000/month depending on configuration.

Availability: Commercially available on subscription and widely used by US general contractors; layout errors cause roughly 30% of construction rework, which is the problem this robot attacks.

WHERE IT WINS

  • Attacks rework, the most expensive waste in construction
  • Cuts layout time by roughly 75%
  • Design changes reach the slab within hours via BIM

WHERE IT LOSES

  • Value depends on clean, coordinated BIM models
  • Subscription economics favor busy contractors over occasional use
  • Interior slab work only - not a facade or exterior tool

The full review

FieldPrinter attacks the most expensive waste stream in construction with the least dramatic robot in this index. Layout errors cause roughly 30% of rework, and rework is the industry's silent budget killer — so Dusty built a compact autonomous printer that drives the slab and prints the entire BIM model onto the concrete at millimetre accuracy: walls, doors, penetrations, MEP runs, every trade's lines in one pass. Contractors report layout time dropping by about 75%, and when the design changes, the new layout is on the slab within hours instead of re-snapped by hand over days.

The subscription model (industry estimates put it around $3,000–$5,000 per month) fits how the value works: a busy GC running commercial interiors amortizes it across continuous projects, while occasional use pencils worse. Like Jaibot, its output quality is a mirror of your model quality — coordinated BIM in, flawless floors out; conflicts in, conflicts printed. And it's an interiors tool: slabs, not facades.

Our read: for general contractors and framers on complex commercial interiors, FieldPrinter has the clearest six-to-twelve-month payback in construction robotics, because it attacks rework — the cost everyone pays and nobody budgets. It's the recommendation we make when a contractor asks where to start.

Frequently asked

How much does the Dusty Robotics FieldPrinter cost?
The Dusty Robotics FieldPrinter is not sold at a retail price. Dusty offers subscription pricing; industry estimates put it around $3,000–$5,000/month depending on configuration.
Can I get the Dusty Robotics FieldPrinter right now?
Commercially available on subscription and widely used by US general contractors; layout errors cause roughly 30% of construction rework, which is the problem this robot attacks.
What are the key specs of the FieldPrinter?
Key specs of the FieldPrinter: task — Prints BIM layout onto slabs; speed — ~75% faster than manual layout; platform — Compact autonomous mobile printer; sensing — Total-station positioning; crew — 1 operator per unit.
Who is the FieldPrinter best for?
General contractors and framers on commercial interiors who want near-zero layout error across complex floor plans. Current availability status: Subscription.

Software for the FieldPrinter

No reviewed software listings for this model yet

Built something that runs on this model? Submit it for review.

Software subscriptions are separate from hardware offers in the store and never affect a robot’s score — see how we rate.

Compare the FieldPrinter

Buyer's guides featuring the FieldPrinter

Or look at the alternatives

Explore: The Robot Database Robot Waitlist Tracker Best Robots 2026 Robot Match Quiz